| 부품번호 | 제조사 | 응용 프로그램 |
|---|
| REF02Z | MAXIMIC | +5V precisioon voltage reference. Max TEMPCO 25ppm/degC. Initial error +-25mV |
| MAX6319MHUK32D-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.200V, reset timeout(min) 1120ms |
| MAX480EPA | MAXIMIC | High-precision, low-voltage, micropower op amp. |
| MAX314MJE | MAXIMIC | 10Om, quad, SPST, CMOS analog switch |
| MAX6316MUK33DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.300V, min reset timeout 1120ms, typ watchdog timeout 6.3ms |
| DG409AK | MAXIMIC | Improved, dual 4-channel, CMOS analog multiplexer |
| MX536ASH | MAXIMIC | 1V. Auxiliary dB output 60dB range. Low power 1.2mA(typ). |
| MAX6313UK31D3-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 3.003(min) 3.157(max).Nominal timeout period 140ms. |
| MAX505BCWG | MAXIMIC | Quad 8-bit DAC with Rail-to-Rail voltage outputs. Double-buffered logic inputs. TUE +-3/2 LSB. |
| MAX6318MHUK43BZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.300V, reset timeout(min) 20ms, watchdog timeout(typ) 25.6sec |
| MAX6317HUK50CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 5.000V, min reset timeout 140ms, typ watchdog timeout 102ms |
| MAX6316LUK35AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.500V, min reset timeout 1ms, typ watchdog timeout 6.3ms |
| MAX4570CAI | MAXIMIC | Serrially controlled, dual 4x2, clickless audio/video crosspoint switches. |
| MAX6355MSUT-T | MAXIMIC | Triple-voltage microprocessor supervisory circuit with manual reset. Reset threshold 4.38V (Vcc5) and 2.93V (Vcc3). Active-low open-drain reset. |
| MAX6317HUK28DY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 2.800V, min reset timeout 1120ms, typ watchdog timeout 1.6sec |
| MAX4618CUE | MAXIMIC | Low-woltage, high-speed, CMOS analog IC configured as two 4-channel multiplexer |
| MAX6307UK27D2-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds2.633(min),2.768(max).Nominal timeout period 20ms. |
| MAX1614EUA | MAXIMIC | High-side,N-channel MOSFET switch driver |
| MAX6376UR24-T | MAXIMIC | Ultra-low-power voltage detector, 2.4V |
| MAX6375UR26-T | MAXIMIC | Ultra-low-power voltage detector, 2.6V |
| MAX1247AMJE | MAXIMIC | +2.7V, low-power, 4-channel, serial 12-bit ADC. INL (LSB) +1/2,-1/2 |
| MAX4632CSE | MAXIMIC | Fault-protected, high-voltage, dual analog switch (two NO/NC SPDT switches). Fault protection +-40V with power off, +-25V with +-15V supplies. |
| MAX706ESA | MAXIMIC | Low-cost, microprocessor supervisory circuit. Active-low manual reset input. Independent watchdog timer - 1.6s timeout. Precision supply-voltage monitor 4.4V. |
| MAX6225ACSA | MAXIMIC | Low-noise, precision, +2.5V output voltage reference. Max TEMPCO (ppm/C) 2.0. |
| MAX6317HUK50AZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 5.000V, min reset timeout 1ms, typ watchdog timeout 25.6sec |
| MAX884CPA | MAXIMIC | 3.3V or adjustable, low-dropout, low current, 200mA linear regulator. 1microA(max) shutdown(OFF) mode. |
| MX7578TD | MAXIMIC | Calibrated 12-bit A/D converter |
| MAX495ESA | MAXIMIC | Single, micropower, single-supply operation (+2.7V to +6V), Rail-to-Rail op amp. |
| DS1859E-020/T&R | MAXIMIC | Dual, temperature-controlled resistors with internally calibrated monitors, 20KOhm |
| MAX513CSD | MAXIMIC | Low-cost, triple, 8-bit voltage-output DAC with serial interface. |
