| 부품번호 | 제조사 | 응용 프로그램 |
|---|
| MAX6309UK30D3-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 2.925(min),3.075(max) Nominal timeout period 140ms. |
| MAX6379UR45-T | MAXIMIC | Ultra-low-power voltage detector, 4.5V |
| MAX5251BEAP | MAXIMIC | +3V, quad, 10-bit, voltage-output DAC with serial interface. INL(LSB) +-1. |
| MAX509BCAP | MAXIMIC | Quad, serial 8-bit DAS with Rail-to-Rail output. TUE (LSB) +-1 1/2 |
| MAX6321HPUK46DY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.630V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| MAX176BEPA | MAXIMIC | Serial-output, 250 ksps 12-bit ADC with T/H and reference. Error(LSB) +-1. |
| MAX1090BCEI | MAXIMIC | 400ksps, +5V, 8-channel single-ended/4-channel pseudo-differential, 10-bit ADCs with +2.5V reference and parallel interface. INL (LSB) 1 |
| MAX6316MUK28CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 2.800V, min reset timeout 140ms, typ watchdog timeout 1.6sec |
| MXD1000PA200 | MAXIMIC | 5-tap silicon delay line |
| MAX6346XR46-T | MAXIMIC | Microprocessor supervisory circuit (reset output active-low, push-pull). Reset threshold (typ) 4.630V. Standard version. Order increment 2.5k |
| DG412DJ | MAXIMIC | Improved, quad, SPST analog switches |
| MAX186DEAP | MAXIMIC | Low-power, 8-channel, serial 12-bit ADC. |
| MX7541AJEWN | MAXIMIC | CMOS 12 bit multiplying D/A converter. Error 1 LSB. |
| MAX6318MHUK31AX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.080V, reset timeout(min) 1ms, watchdog timeout(typ) 102ms |
| DG528CWN | MAXIMIC | 8-channel latchable multiplexer |
| MAX747ESD | MAXIMIC | High-efficiency, PWM, step-down P-channel DC-DC controller |
| MAX6314US41D3-T | MAXIMIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 4.10V. Reset timeout period(min) 140ms. |
| MAX6318MHUK42BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.200V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX6316LUK33AX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.300V, min reset timeout 1ms, typ watchdog timeout 102ms |
| MAX113EAG | MAXIMIC | 3 V, 400 ksps, 4-channel, 8-bit ADC |
| MAX3319ECAE | MAXIMIC | +-15kV ESD-protected, 2.5V, 1microA, 460kbps, RS-232 compatible transceiver. |
| MAX923CUA | MAXIMIC | Dual micropower, low-voltage comparator. Intarnal 1.182V+-1% voltage reference. Internal programmable hysteresis. |
| MAX1630EAI | MAXIMIC | Multi-output, low-noise power-supply controller for notebook computers. |
| MAX4275BHEUA | MAXIMIC | Dual, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 40, 1+ (Rf/Dg) noninverting gain 41, -3dB BW 390kHz. |
| MAX704RCPA | MAXIMIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 2.625V. Active-low reset. Manual reset input. Backup-battery switch. Power-fail threshold accuracy +-4%. Power-fail comparator. Reset window +-75mV |
| MAX156BEWI | MAXIMIC | 4-channel ADC with simultaneous T/Hs and reference. Error +-1 LSB. |
| MAX6316LUK33CZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.300V, min reset timeout 140ms, typ watchdog timeout 25.6sec |
| MAX6315US42D1-T | MAXIMIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 4.20V. Reset timeout period(min) 1ms. |
| MXD1000PD45 | MAXIMIC | 5-tap silicon delay line |
| MAX6030AEUR-T | MAXIMIC | Precision, low-power, low-dropout, SOT23-3 voltage reference. Output voltage 3.000V, input voltage (Vout + 200mV)V to 12.6V. |
