| 부품번호 | 제조사 | 응용 프로그램 |
|---|
| MAX820TESE | MAXIMIC | Microprocessor and non-volatile metory supervisory circuit. Reset threshold 3.06V. Reset and low-line threshold accuracy +-2% |
| MAX807NMJE | MAXIMIC | Full-featured microprocessor supervisory circuit with +-1.5% reset accuracy. Reset threshold (typ) 4.575V |
| MAX131EPL | MAXIMIC | 3 1/2 Digit A/D converter with bandgap reference |
| MAX3224EPP | MAXIMIC | 1microA supply current, 1Mbps, 3.0V to 5.5V, RS-232 transceiver with autoshutdown plus |
| MAX6317HUK31DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.080V, min reset timeout 1120ms, typ watchdog timeout 102ms |
| MAX1114AIBH | MAXIMIC | 8-bit,150 Msps flash ADC |
| MAX698EPA | MAXIMIC | Low cost power-on reset controller. |
| MAX694EJA | MAXIMIC | Microprocessor supervisory circuit. |
| MAX242C/D | MAXIMIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX6241ACPA | MAXIMIC | Low-noise, precision, +4.096V output voltage reference. Max TEMPCO (ppm/C) 2.0. |
| MAX639ESA | MAXIMIC | 5V or adjustable, high-efficiency, current-limiting PFM control scheme, step-down DC-DC converter. |
| MAX405C/D | MAXIMIC | Precision video buffer amplifier. |
| MAX5253BCPP | MAXIMIC | +3V, quad, 12-bit, voltage-output DAC with serial interface. INL(LSB) +-1. |
| MX7545AUQ | MAXIMIC | TTL/CMOS compatible for Vdd = 5V or CMOS compatible for Vdd = 15V, 12-bit buffered multiplying DAC. Gain error +-1 LSB. |
| MAX351MJE | MAXIMIC | Precision, quad, SPST analog switch |
| MAX4614CUD | MAXIMIC | Low-woltage, high-speed, quad, SPST, CMOS analog switch has four NO switches. |
| MAX241EEAI | MAXIMIC | +-15kV ESD-protected, +5V RS-232 transceiver |
| MAX460IGC | MAXIMIC | High accuracy fast buffer |
| MAX6317HUK38BZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.800V, min reset timeout 20ms, typ watchdog timeout 25.6sec |
| MAX9685C/D | MAXIMIC | Ultra-fast ECL-output comparator with latch enable. |
| MAX6316MUK35DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.500V, min reset timeout 1120ms, typ watchdog timeout 102ms |
| MAX1111MJE | MAXIMIC | 2.7 V, low-power, multichannel, serial 8-bit ADC. 4-channel single-ended or 2-channel differential inputs |
| MAX6320PUK26AX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.630V, reset timeout(min) 1ms, watchdog timeout(typ) 102ms |
| MAX4612EPD | MAXIMIC | Low-voltage, quad, SPST, CMOS analog switches (two NC and two NO switches). |
| MAX6320PUK26DY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.630V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| MAX6318MHUK36DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.600V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MAX326ESE | MAXIMIC | Quad, SPTS, ultra-low leakage, CMOS analog switch. |
| MAX6315US44D3-T | MAXIMIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 4.39V. Reset timeout period(min) 140ms. |
| MAX6321HPUK39BZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.900V, reset timeout(min) 20ms, watchdog timeout(typ) 25.6sec |
| MXD1013PA012 | MAXIMIC | 3-in-1 silicon delay line. Output delay 12ns. |
