| 부품번호 | 제조사 | 응용 프로그램 |
|---|
| MAX6318LHUK49BZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input, reset output active-low, push/pull; active-high,push/pull).Factory-trimmed reset threshold (typ) 4.900V, min reset timeout 20ms, typ watchdog timeout 25.6sec |
| MAX6317HUK45AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.500V, min reset timeout 1ms, typ watchdog timeout 6.3ms |
| MAX623CPE | MAXIMIC | High-side power supply. |
| MAX6313UK39D4-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 3.803(min) 3.998(max).Nominal timeout period 1120ms. |
| MAX921CPA | MAXIMIC | Single micropower, low-voltage comparator. Internal 1.182V+-1% voltage rsference Internal programmable hysteresis. |
| MX7828LCWI | MAXIMIC | CMOS, high-speed, 8-bit ADC with multiplex. Error (LSB) +-1/2 |
| MAX6316MUK39DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.900V, min reset timeout 1120ms, typ watchdog timeout 102ms |
| MAX202CPE | MAXIMIC | +5V RS-232 transceiver with 0.1 microF external capacitors |
| MAX4544ESA | MAXIMIC | Low-voltage, single-supply single SPDT analog switch. |
| MAX6318MHUK40BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX151BMRG | MAXIMIC | 300kHz 10-bit A/D converter with reference and T/H. TUE 1.5 LSB. |
| MAX6316MUK45BZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.500V, min reset timeout 20ms, typ watchdog timeout 25.6sec |
| MAX6318MHUK31DY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.080V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| MAX682ESA | MAXIMIC | 3.3V-input to regulated 5V-output charge pump |
| MAX632BEPA | MAXIMIC | CMOS fixed +12V output voltage, adjustable output with 2 resistors step-up switching regulator. 10% output accuracy. |
| MAX6315US31D4-T | MAXIMIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 3.08V. Reset timeout period(min) 1120ms. |
| MX7503SQ | MAXIMIC | Low-power, monolithic, CMOS analog multiplexer. |
| DG528AK | MAXIMIC | 8-channel latchable multiplexer |
| MAX4666EPE | MAXIMIC | 5om, quad, SPST, CMOS analog switch (two NC and two NO switches). |
| MAX5175AEEE | MAXIMIC | Low-power, serial, 12-bit DAC with force/sense voltage output. Single-supply +5V operation. Full-scale output range +2.048V(Vref=+1.25V). INL(LSB) +-1. |
| DG441CJ | MAXIMIC | Improved, quad, SPST analog switch |
| MAX6318LHUK33CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.300V min, reset timeout 140ms, typ watchdog timeout 1.6sec |
| MAX410BESA | MAXIMIC | Single, 28MHz, low-noise, low-voltage, precision op amp. |
| MAX4580EAE | MAXIMIC | 1.25om, dual SPST, CMOS analog switch. Two NC (normally closed) switches. |
| MAX1612EEE | MAXIMIC | Bridge-battery backup controller for notebooks |
| MAX810TEXR-T10 | MAXIMIC | Microprocessor reset circuit. Reset threshold 3.08V. Push-pull active-high reset. 10k increments. |
| MAX6322HPUK43D-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.300V, reset timeout(min) 1120ms |
| MAX4043EUB | MAXIMIC | Single/dual/quad, low-cost, micropower rail-to-rail I/O op amp. |
| MAX189CCWE | MAXIMIC | +5V, low-power, 12-bit serial ADC. Error(LSB) +-2. |
| MAX6320PUK26AZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.630V, reset timeout(min) 1ms, watchdog timeout(typ) 25.6sec |
