| 부품번호 | 제조사 | 응용 프로그램 |
|---|
| MXD1210MJA | MAXIMIC | Nonvolatile RAM controller |
| MAX6318MHUK45AX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.500V, reset timeout(min) 1ms, watchdog timeout(typ) 102ms |
| MAX6316MUK28DY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 2.800V, min reset timeout 1.12sec, typ watchdog timeout 1.6sec |
| MAX510ACWE | MAXIMIC | Quad, serial 8-bit DAC with Rail-to-Rail output. TUE (LSB) +-1 |
| MAX6501UKP095-T | MAXIMIC | Low-cost, +2.7V to +5.5V micropower temperature switch. Output stage open-drain. Standard temperature threshold(C) +95. |
| MAX6332UR17D2-T | MAXIMIC | Ultra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 1.7V, reset timeout(min) 20ms. |
| MAX6320PUK29AX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.930V, reset timeout(min) 1ms, watchdog timeout(typ) 102ms |
| MX7672UQ05 | MAXIMIC | High-speed 12-bit A/D converter with external reference input. Fast conversion time 5 microsec. Linearity +-3/4 LSB. |
| MAX4534EPD | MAXIMIC | Fault-protected, high-voltage, single 4-to-1 multiplexer operated with +-4.5V to +-20V dual supply or a +9V to +39V single supply. |
| MAX1092BEEG | MAXIMIC | 400ksps, +5V, 4-channel single-ended/2-channel pseudo-differential, 10-bit ADCs with +2.5V reference and parallel interface. INL (LSB) 1 |
| MAX6321HPUK40AY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 1ms, watchdog timeout(typ) 1.6sec |
| MAX708CUA | MAXIMIC | Low-cost, microprocessor supervisory circuit. Active-high reset output. Precision supply-voltage monitor 4.4V. |
| MAX4583ESE | MAXIMIC | Low-voltage, CMOS analog switch (three SPDT switches). |
| MAX6318LHUK29AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 2.930V min, reset timeout 1ms, typ watchdog timeout 6.3ms |
| MAX6335US16D3-T | MAXIMIC | Ultra-low-voltage, low-power microprocessor circuit with manual reset (reset output active-high, push/pull . Reset threshold(typ) 1.6V, reset timeout(min) 100ms. Standard version |
| MAX808LESA | MAXIMIC | Supervisory circuit with +-1.5% reset accuracy. Reset threshold(typ) 4.675V. CMOS RAM write protection.. |
| MAX6320PUK36BZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.600V, reset timeout(min) 20ms, watchdog timeout(typ) 25.6sec |
| MAX6316MUK26DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 2.630V, min reset timeout 1.12sec, typ watchdog timeout 6.3ms |
| MAX6319LHUK30C-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-low,push/pull and active-high, push/pull).Factory-trimmed reset threshold(typ) 3.000V, reset timeout(min) 140ms |
| MAX3089ESD | MAXIMIC | Fail-safe, high-speed (10Mbps), slew-rate-limited RS-485/RS-422 transceiver |
| ICL7621DCPA | MAXIMIC | Dual operational amplifier, 15mV |
| HI0-0201HS-6 | MAXIMIC | High-speed, CMOS, quad, SPST analog switch |
| MAX697CWE | MAXIMIC | Microprocessor supervisory circuit. Onboard gating of chip enable signals. |
| MAX6346UR39-T | MAXIMIC | Microprocessor supervisory circuit (reset output active-low, push-pull). Reset threshold (typ) 3.900V. Order increment 10k |
| MAX148AEPP | MAXIMIC | +2.7V to +5.25V, low-power, 8-channel, serial 10-bit ADC. INL(LSB) +-1/2. |
| MAX6319LHUK40A-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-low,push/pull and active-high, push/pull).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 1ms |
| MAX6318MHUK42BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.200V, reset timeout(min) 20ms, watchdog timeout(typ) 6.3ms |
| MAX204C/D | MAXIMIC | +5V RS-232 transceiver with 0.1 microF external capacitors |
| MAX6320PUK42DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.200V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms |
| MAX5161NEUT | MAXIMIC | Low-power, digital potentiometer. R(kom) 200. |
