| 부품번호 | 제조사 | 응용 프로그램 |
|---|
| MAX6361LUT44-T | MAXIMIC | Low-power microprocessor supervisory circuit with manual reset input. Reset threshold(typ) 4.38V. Active-low push-pull reset. |
| MAX6322HPUK47D-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.700V, reset timeout(min) 1120ms |
| MAX6318MHUK45DY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.500V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| MAX6314US38D3-T | MAXIMIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 3.80V. Reset timeout period(min) 140ms. |
| MAX844C/D | MAXIMIC | Low-noise, regulated, -2V GaAsFET bias. |
| MAX664CPA | MAXIMIC | Dual Mode 5V or programmable micropower voltage negative regulator. |
| MAX802TC/D | MAXIMIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 3.075V. Active-low reset. Watchdog input. Backup-battery switch. Power-fail threshold accuracy +-2%. Power-fail comparator. Reset window +-2% |
| MAX691AMJE | MAXIMIC | Microprocessor supervisory circuit. Reset threshold(typ) 4.65V. |
| ICM7218CIJI | MAXIMIC | 8 digit LED display driver |
| MAX6332UR17D1-T | MAXIMIC | Ultra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 1.7V, reset timeout(min) 1ms. |
| MAX6316LUK37BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.700V, min reset timeout 20ms, typ watchdog timeout 6.3ms |
| MAX5102BEUE | MAXIMIC | +2.7V to 5.5V, low-power, dual, parallel 8-bit DAC with Rail-to-Rail voltage output. INL (LSB) +-2 |
| MAX6313UK37D1-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 3.608(min) 3.793(max).Nominal timeout period 1ms. |
| MAX4053C/D | MAXIMIC | Low-voltage, CMOS analog switch |
| MAX505BCAG | MAXIMIC | Quad 8-bit DAC with Rail-to-Rail voltage outputs. Double-buffered logic inputs. TUE +-3/2 LSB. |
| MAX6316MUK27DY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 2.700V, min reset timeout 1.12sec, typ watchdog timeout 1.6sec |
| MAX6316LUK30CZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.000V, min reset timeout 140ms, typ watchdog timeout 25.6sec |
| MAX398EPE | MAXIMIC | Precision, 8-channel, low-voltage, CMOS analo0g multiplexer. |
| MXD1000SA60 | MAXIMIC | 5-tap silicon delay line |
| MXD1005PD60 | MAXIMIC | 5-tap silicon delay line |
| MAX468CPE | MAXIMIC | Two-channel, quad video buffer. Voltage gain 1V/V. |
| MAX4539EAP | MAXIMIC | Low-voltage, single 8-to-1 calibration multiolexer. |
| MAX208ECNG | MAXIMIC | +-15kV ESD-protected, +5V RS-232 transceiver |
| MAX6322HPUK38D-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.800V, reset timeout(min) 1120ms |
| DG303BWE | MAXIMIC | Dual, TTL compatible CMOS analog switch. |
| MAX491ECSD | MAXIMIC | +-15kV ESD-protected, low-power, RS-485/RS-422 transceiver. Full-duplex. Data rate 2.5Mbps. Slew-rate limited - no. Low-power shutdown - no. Receiver/driver enable - yes. Quiescent current - 300 microA. Number of transmitter on bus - 32. |
| MAX6241BCSA | MAXIMIC | Low-noise, precision, +4.096V output voltage reference. Max TEMPCO (ppm/C) 5.0. |
| MAX6318LHUK49BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input, reset output active-low, push/pull; active-high,push/pull).Factory-trimmed reset threshold (typ) 4.900V, min reset timeout 20ms, typ watchdog timeout 6.3ms |
| MX7545LCWP | MAXIMIC | CMOS 12-bit buffered multiplying DAC. Error +-1/2 LSB. |
| MAX2411AE/D | MAXIMIC | Low-cost RF up/downconverter with LNA and PA driver. |
