| 부품번호 | 제조사 | 응용 프로그램 |
|---|
| MAX239C/D | MAXIMIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX4147ESD | MAXIMIC | 300MHz -3bB bandwidth, low-power, high-output-current, differential line driver. 2V/V fixed gain. |
| MAX197BEAI | MAXIMIC | Multi-range (+10V, +5V, +10V, +5V), single +5V, 12-bit DAS with 8+4 bus interface |
| MAX786RCAI | MAXIMIC | Dual-output power-supply controller for notebook computers |
| MAX545BESD | MAXIMIC | +5V, serial-input, voltage-output, 14-bit DAC. INL (LSB) +-1 |
| MAX113MRG | MAXIMIC | 3 V, 400 ksps, 4-channel, 8-bit ADC |
| MAX6318LHUK48BX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input, reset output active-low, push/pull; active-high,push/pull).Factory-trimmed reset threshold (typ) 4.800V, min reset timeout 20ms, typ watchdog timeout 102ms |
| MXD1005SE250 | MAXIMIC | 5-tap silicon delay line |
| MAX6304EPA | MAXIMIC | +5V, low-power microprocessor supervisory circuit with adjustable reset/watchdog (active-high reset, push/pull reset output. |
| MXD1013PA050 | MAXIMIC | 3-in-1 silicon delay line. Output delay 50ns. |
| MAX275BMJP | MAXIMIC | 4th-order continuous-time active filter |
| MAX6317HUK31DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.080V, min reset timeout 1120ms, typ watchdog timeout 6.3ms |
| MAX448C/D | MAXIMIC | Quad high-speed, fast-settling, high output current operational amplifier |
| MAX6320PUK28BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.800V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX186BEAP | MAXIMIC | Low-power, 8-channel, serial 12-bit ADC. |
| MAX418EPD | MAXIMIC | 1.2microA max, quad, single-supply op amp. |
| MAX6320PUK42DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.200V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MAX197ACWI | MAXIMIC | Multi-range (+10V, +5V, +10V, +5V), single +5V, 12-bit DAS with 8+4 bus interface |
| MAX6316LUK31AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.080V, min reset timeout 1ms, typ watchdog timeout 6.3ms |
| MAX4275AEESA | MAXIMIC | Dual, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 1.25, 1+ (Rf/Dg) noninverting gain 2.25, -3dB BW 450kHz. |
| MAX6318MHUK45CW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.500V, reset timeout(min) 140ms, watchdog timeout(typ) 6.3ms |
| MAX6318MHUK39DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.900V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms |
| MAX293CPA | MAXIMIC | 8th-order, lowpass, elliptic, switched-capacitor filter. Clock-tunable corner-freguency range 0.1Hz to 25kHz |
| MAX6318MHUK47BZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.700V, reset timeout(min) 20ms, watchdog timeout(typ) 25.6sec |
| MAX545BCSD | MAXIMIC | +5V, serial-input, voltage-output, 14-bit DAC. INL (LSB) +-1 |
| MAX6319LHUK34A-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-low,push/pull and active-high, push/pull).Factory-trimmed reset threshold(typ) 3.400V, reset timeout(min) 1ms |
| MAX6318MHUK38CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.800V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
| DG529DK | MAXIMIC | 8-channel latchable multiplexer |
| MAX875AMJA | MAXIMIC | Low-power, low-drift precision voltage reference. 5V+-2.0mV output (Ta=25gradC). TEMPCO(max) 7ppm/gradC. |
| MAX6316LUK28DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 2.800V, min reset timeout 1120ms, typ watchdog timeout 6.3ms |
